Delta Calibration v092 help (1 reply)
Hi, I recently printed a kossel 20x20 (http://www.thingiverse.com/thing:154832) but most of the other part are stock rostock like, carbon arm with plastic jaw, end effector, XYZ carriages etc, I have...
View ArticleRepetier Ramps 1.4 Dual Y Stepper Problem (no replies)
I am building a cnc style (cartisian) laser engraver. You can see an old pic of it here I am using dual Y steppers. The main issue I am having is I can move the Y axis in the - direction fine but when...
View ArticleWhat matters mor for rendering and slicing? (1 reply)
I did a quick search with nothing specific coming up so I thought I would ask here. What does Repetier Host and slic3r depend on most? Ram, GPU ,CPU or a combination? I slice big things on my PC for...
View ArticlePrints stop—can't see why. (1 reply)
I have a large object that I've printed several copies of, it takes about 5h to print, I've printed four of them so far. Sometimes, the print will complete seamlessly, but sometimes the print will...
View Articleprinter will not print (1 reply)
Hello all as a newbe i seem to come to a brick wall, I have a DIY Prusa 1.4 with Arduino boards running Marlin software, my problem is I can connect with Repetier heat the extruder load a stl fil and...
View ArticlePrinter not starting after long shutdown (no replies)
I have not used my Prusa/Mendel printer for several months. When last used it worked well using Repentier and Slic3r. It is in my workshop, dry, and dust free. When last used I used an older HP laptop...
View ArticleBrand new build reacting oddly. (no replies)
I just recieved and built a Prusa i3 (Zonestar p208) the build came off flawlessly but I do not like this frame and will modify if slightly to include tensioners for the y and z belts. If you want to...
View ArticleWhat is the difference between INVERT_Z_DIR 0 and Z_HOME_DIR ? (no replies)
What is the difference between INVERT_Z_DIR 0 and Z_HOME_DIR I am trying to get the Z axis to move down towards the endstop and print bed when pressing the home buttton in Repetier Host manual...
View ArticleRepetier-Server config with Marlin (1 reply)
Hi! I'm trying to configure Repetier-Server for my Prusa I3. Once configured, i can't use the manual commands, because my firmware is "Marlin". When I switch to "Repetier-Firmware" in the settings,...
View ArticleDelta Printer with Repetier: Motors movement choppy and slow (no replies)
I just found out: I tested the motors only by trying z-movements ... and it's seems the z-movement has to be very slow. When I do x und y movements the rotation is much better. Indeed, I think this...
View ArticlePID Autotune Error:Line Number is not Last Line Number+1 (2 replies)
Hi everyone, I'm having an issue while trying to tune the PID. The autotuning starts well when I send the following Gcode: "M303 S230 C10" but at the end of the process, I get an error message like...
View Articlemigbot prusa set up problems (no replies)
hello. i am new to 3d printing and to arduino and thought a diy kit would be my best bet to learn on. well i have the printer almost fully set up besides z axis top braces because i am having problems...
View ArticleFirmware not connecting to Repetier host v1.0.6 for Extra Extruders (no replies)
Hello guys, I'm trying to connect an MSP4305529 board with 6 pololu drv 8825 drivers, 3 for the x,y,z axis and 3 for extruders (2 of them are dual extruders) on Repetier host using RAMPS 1.4. The code...
View ArticleExtrudermotor wont turn (no replies)
Hello, ive got an issue with my new PrintrBoard (Rev.D). everything works fine but the extrudermotor. Ok its not the motor i swapped it with the Z-Axis and the motor actually works fine. With the old...
View ArticleError compiling development version 0.92.3 (2 replies)
with the new update of these days this being the result [attachment 53958 Configuration.h] thanks Arduino:1.6.3 (Windows 7), Scheda:"Alligator 3D Printer Board R2 (Native USB Port)" #define...
View ArticleMeaning of two items in Repetier Host (2 replies)
Hi, In Repetier Host in the manual control tab, there are two items under the control buttons for the axis'. One is feed rate and has a slider for adjustment and the other is flow rate and also has a...
View Articlecannot connect with EEPROM enabled (version 0.92x) (no replies)
I'm suspecting the baudrate is incorrectly stored in the EEPROM, when enabled. Or is it just me? If I recompile with "#define EEPROM_MODE 0", I can connect (with terminal, Repetier host, pronterface,...
View Article3d preview suddenly looks ugly (2 replies)
Hello. Since I updated my AMD video driver, the 3d preview in Repetier looks really ugly! I can't see the layers very well anymore, unless I zoom in ridiculously far. (see attached pictures) There are...
View ArticleRepetier Firmware with Amazon LCD (no replies)
Are there settings I can use with the firmware to use this LCD screen? [www.amazon.com]
View ArticleRepetier with SSD1306 oled display 128x64 ? (no replies)
I guys, i connect a 0.95" oled lcd to the i2c pin on ramps 1.4, upload a test sketch and works great, so... i try to "merge" the existing ui class to work with this lcd but nothing appen, i setup the...
View Article