Repetier host and server (1 reply)
Hi all I have an easy question: can rep-host and rep-server live together on the same PC? It is a x86 lubuntu PC. can i install them both or they can conflict? Bye
View ArticleScreen setup Windows (6 replies)
Repetier Host 090C - Win7/64bit My screen setup in Repetier Host is lost if I enter max view in windows and exit program, but remembered if exit in min mode. So if I have log displayed beneath object...
View ArticlePrinter gets a little lost (2 replies)
Greetings! So here I am printing along just fine, working on iPhone covers (8 so far though not all in one night) and while printing another one my delta, running the latest version of Repetier- host...
View ArticleTemperature monitoring (6 replies)
In ver 0.95 I find menu "Temperature/Continous Monitoring" to be grayed out. What is the purpose of this nonselectable menu? However it can be selectable, just move mouse over another menu and back...
View ArticleCustom drive system? (2 replies)
I have designed a custom drive system based in scara and polar I have knowledges in programming but I dont understand the program structure, I also have maths that are needed and are optimized to...
View Article3D vizualization (2 replies)
With latest v95B i found a new utility in Config/3d view/filament.filament for better display, but I get a weird display with this. Is it my graphic that does not work or.. Also with v095 I saw some...
View ArticleZ axis crashing into the bed instead of moving away (4 replies)
Hi guys I'm having a little bit of a problem with my setup, I'm running it on a AzteegX3 with repetier firmware on it. The homing for all the axis goes well, but when it starts printing it moves the z...
View ArticleRepetier 0.95b don't show Skeinforge Profile Configuration window (9 replies)
Good Morning Guys, I have a trouble using repetier host 0.95 and 0.95b: when I try to modify profiles, the configure window will not show up, and what is worst no error message is displayed. someone...
View Articlestumped on the z-axis (1 reply)
Hi there, I'm building my own printer, and everything goes reasonably well, but.... My Z-axis behaves strangely. After starting a printjob, all axis go to their home position, and for the z-axis that...
View ArticleMore than two extruder (2 replies)
Hello all. I have finished (well, almost) building a triple extruder printer, but I am dubious about firmware support: Config.h says that maximum 2 extruders are supported: /** Number of extruders....
View ArticleAutomatic Packing (1 reply)
when I load an stl file Repetier says Automatic Packing disabled to many items (there is only one item). Anyone have any idea's ? Thanks
View ArticleConsistent crashes with Leapfrog and Repetier (no replies)
My experience with 3D printing is limited, and I have most certainly dived in at the deep end. I have thus far managed to overcome hardware problems, twice, and believe I could now build one of these...
View ArticleZ axis speed (only at print start) (1 reply)
Hi. My printer is working mostly fine (own design) with the z never missing a step. Doing a Z home is never a problem. However, when I start a new print there is some Z positioning up and down and the...
View ArticleStuck at Splash Screen (no replies)
Sorry if this has been asked before; Search didn't turn up anything similar. Running Windows 7 (32-bit) and loaded Repetier-Host 0.95C on a Dell Latitude d620. .Net4 is installed, and the video card...
View ArticleLayer errors in tall prints (no replies)
Greetings and Happy Holidays! First... The new version of Repetier is wonderful...nicely done! I just printed two large parts (carriage ends for a Prusa) and both pieces printed well but showed the...
View Articlecompile error with firmware & lcd (no replies)
I got this compile error and don't have any idea how to correct it. SdFat.cpp:2693:26 error: variable "crctab" must be const in order to be put into read-only section by means of...
View ArticleLast 2 Layer too slow Speed (no replies)
Hi guys, I'm having some trouble slicing with Skeinforge, all the print goes well but when it arrive at the last 2 (maybe 3) layer the speed is considerably decreased, with a bad printing as a...
View ArticleMac v. PC quality (3 replies)
My Dad and I are both using the latest version of the host software, the only difference is he is using a PC and I am using Mac. I used a generic STL file on the internet, but the quality of his...
View ArticleUsing Dual Z drivers + dual extruders on the Rumba board running repetier? (4...
Anyone here using the Rumba board from reprapdiscount? I`m building my ORD BOT Hadron using this board + Bulldog Lite extruder. I have studied the Marlin firmware and got X,Y and Z axis + extruder +...
View ArticleFirmware and boards (4 replies)
Are there any plans for Repetier firmware to work with "Mightyboard"? As fitted to the Rplicator Dual and clones Cheers
View Article