Negative layer height value ?? (no replies)
Hello, i have a Prusa with auto leveling and everything works fine for printing. I have made a small engraving head on the printer, but how can i make a lower level of the Z every layer ?? layer 1...
View Articletemperature not rising (no replies)
I start the repetier host, and the bed and extrusion are starting to heat up. After couple of minutes the temperature stops rising for both bed and extruder. The bed stops around 80 and extruder...
View ArticleM190 wait for cool bed (no replies)
Trying to use some servos and gcodes to auto eject my prints after they're done printing. I've read alot of posts about M190 waiting for bed temp whether the desired temp needs heating or cooling...
View ArticleRepetier ACM0 bad communication [solved] (1 reply)
Hi & happy new year, I've a little problem with Repetier Host and my SmartCore, USB communication is not working for init. I've set /dev/ttyACM0 and 1500000 bauds, Repetier say "connected" but the...
View Articleonline configurator Repetier TUTORIAL 0.92.8 (2 replies)
hi, you know where I can find a guide that explains step by step how to set the parameters of the firmware REPETIER 0.92.8 ? ( and where I can find the meaning of the parameters ? )
View ArticleRepetier with board controller InterpCNC 2.1 (no replies)
Hello guys, I'm a new this forum and i want to create my 3D printing but i have a question : I will use a Repetier to controle my 3D printing but i want to use my electrical system CNC and thereby to...
View ArticleRepetier-Host M80/M81 with Arduino Relay (no replies)
Hi, I'm working setting up a standard Arduino relay (something like this: [i.imgur.com]) with my RAMPS 1.4 / Marlin firmware board. I have the relay module hooked to 5V, and the POWER_ON RAMPS pin, on...
View ArticleCan't get repetierHost working on my system (no replies)
Hi, Forgive me for my bad english. I have installed repetierHost 1.6.0 on my linux gentoo system few months ago. All was working well till las month. I have done 2 major upgrades on my system and now...
View Articleproblem reading thermistor values with RADDS+ArduinoDue (no replies)
Hello guys, I need your help with the thermistor configuration! In the last two years I've built a mendelmax1.5 and now I have designed my own 3printer with ArduinoDue and RADDS. I've always checked...
View Article3d Visualization - Lights quesiton (2 replies)
Under Preferences > 3d Visualization > Lights there are four lights that can be turned on/off. I'm wondering where (windows path? file?) the ambient/diffuse/specular color data and the x/y/z...
View ArticleRepeater host mac will not send code properly (no replies)
I am running repetier host mac, and have been for almost 3 years without any problem. All of a sudden when I start it it only connects some of the time. I checked my baud rate and it appears to be...
View ArticleHoming only x and y (1 reply)
I have a simple question... i building a cnc and only want to home x and y axis when doing the homing all operation. In the repetier online configurator i not found this option. This is possible?
View ArticleHot end doesn't heat up with Repetier (4 replies)
Hi I'm new to using Repetier (was using Pronterface). I struggling with heating the hot end on my Prusa. I've dug through all the settings and just can't fathom why this strange phenomenon is...
View ArticleUpdate CuraEngine whitin Repetier-Host (no replies)
So as new curaEngine and Cura app support wirePrint I was wondering if its possible tu update curaEngine within RH (manually by changing curaEngine in plugin folder of RH or by making new version of...
View ArticleProblem on printing (1 reply)
Hello everyone.. I have problem on my product printing as refer to my attachment. Can someone help me? I don't know what's wrong. Need help
View ArticleRepetier Host cant close Generated Gcode Not Found screen (no replies)
I have problems on 2 windows lap tops using Repetier Host. If I make a mistake slicing (not sure what) I get an error screen that says "Generated Gcode Not Found" " I Could Not Find the Generated...
View ArticleCannot compile Repetier with full graphics support (no replies)
HI all When compiling Repetier (latest version) in Arudino IDE 1.0.6.I am compliting for a Melzi 2.0 board. I get the following error: SET_INPUT(SDCARDDETECT); Printer.cpp: In static member function...
View ArticleHow to use the app ? (no replies)
When upgrading my Repetier host, the install also put a server on my laptop as well gave me a hint to use the app, to get progress notifications. But what should i install to get that all running ? As...
View ArticleLess torque while homing than traveling (z-axis / probing) (no replies)
I have searched high and low in the forum, modified feedrates, STEPPER_HIGH_DELAY, STEP_DOUBLER_FREQUENCY, ALLOW_QUADSTEPPING, DOUBLE_STEP_DELAY one at a time but the result is always the same (tested...
View ArticleRepetier Host V1.6.1, Error: Line Number is not Last Line Number +1 (1 reply)
Any help on this would be greatly appreciated. My hotend was working just fine when I needed to replace HotEnd Barrel. I powered everything down and changed it. I started Repetier back up it asked to...
View Article