Spikes? (1 reply)
Sorry if you have answered this before but what causes these spike anomalies? attached is a snapshot from the Repetier 3D view screen
View ArticleProblem with Z-Probing (1 reply)
Background: I have a Mega + RAMPS 1.4 on a custom-built corexy robot. I use 2 Z steppers and since one has greater unpowered holding, they get *slightly* out of alignment (< 1mm) I was using...
View ArticleZ lift on extruder change (no replies)
Have a Kossel Mini with RAMPS 1.4 and Marlin; printing via Repetier host. I have successfully printed 2-color prints, but at the time the color change occurs (switch from E0 to E1) the printer Z lifts...
View ArticleJam detection question(s) (1 reply)
Hello I am using v 0.92.5 and I have enabled jam detection using a friction driven optical quadrature encoder. It appears to me that the jam detection only works one time per print. Is this true? I...
View ArticleIssues with repetier firmware..Fan and fan2 (no replies)
I have been trying to figure out a couple issues i was having running additional case and digitalWrite or analogWrite with marlin firmware so i decided to try the latest repetier firmware..I am...
View ArticleCommunication timeout on Repetier Host (2 replies)
Hi to all, by yesterday i' having a lot of "Communication timeout - reset send buffer block". In repetitier i see strange "log" like, 27, 7 7k ecc. When i get this error the print stop and after some...
View ArticleContinue from layer X? (no replies)
So i just installed a driver and not thinking restarted my pc on a 20h+ print with about 5 hours left. Is there a way on Repetier to continue from a certain layer?? 'iv looked at the print and can...
View ArticleProposed improvement: change homing offsets to milimeters (2 replies)
Improvement suggestion: Change: #define DELTA_X_ENDSTOP_OFFSET_STEPS 0 #define DELTA_Y_ENDSTOP_OFFSET_STEPS 0 #define DELTA_Z_ENDSTOP_OFFSET_STEPS 0 to: #define DELTA_X_ENDSTOP_OFFSET_STEPS...
View ArticleTransfer Repetier setting to new computer (no replies)
Hi all. I had my printer working just perfect from a spare workshop laptop. Now my son has taken the lap top abroard. I thought there would be some settings file he could just send me to use on...
View ArticleDisable any kind of control on axis (1 reply)
Hi to all, there is a way on Repetier to disable any kind of control during motion ? I explain better: i have some g-code that have Z axis negative coordinate and i want that repetier forget that...
View ArticleCant change the delta radius? (1 reply)
Hi, I have just finished my delta build and have a concave motion, in the center the z gap is 0.2mm but at the outside it is 1mm, i have read that i need to tweak the ''#define PRINTER_RADIUS''...
View ArticleZ lowers by Z_PROBE_HEIGHT after Homing to Z_MAX (no replies)
Hi, I use a Prusa i3 with Z-MAX endstop and homing to Z-MAX and latest repetier firmware 0.92.6. After homing, Z lowers by Z_PROBE_HEIGHT (which is 40 by default) and then references this point as...
View ArticleZ Probing and Print issues(not like the norm) (2 replies)
So Ive enabled auto bed leveling and have set my offset for Z probe within the slicer settings. Im using marlin Firmware with ramps 1.4. If you see the attached screen shots, you can see a normal...
View ArticleIssue with height of first layer (no replies)
This is probably a simple question but the Repetier configuration.h file is still mostly gibberish to me. Lol. I've leveled the print bed and when I home the z-axis it's at just the right height above...
View Articledual extruder, prevent oozing (1 reply)
Hi, I changing my printer to have an second hotend. Still not made any tests, but pretty sure i will have oozing problems. found several solutions online, but the best one i think it will work to not...
View ArticleV 0.92.6 Enables "Dry Run" randomly during printing (no replies)
I can check the setting in the LCD "debug" menu. Dry Run off. Then I start a multiple hour print - say, 3 hrs. Halfway through, it stops extruding. The first time this happened I thought it was a jam,...
View ArticleG1 Zxxx command part not executed after auto level - Repetier Host thinks it...
I run into issue and resolved it by inserting a command with Repetier firmware/Host combo, that it ignores the Z change command if Repetier host assumes that it is at same height. When it starts...
View ArticleCompensate for bed warp? (3 replies)
I have a home-built printer with a very large bed (500x500). The problem I have is that when the bed is cool it is completely flat but when I heat it up it gets a very slight bowl shape where the...
View ArticleLCD knob direction change- Repetier (1 reply)
Does anybody know how to change the LCD knob direction in Repetier firmware v0.91? I have seen many threads on changing the LCD knob direction and several requesting instructions for Repetier firmware...
View Article