[Sugestions] fan modes (PWM) (no replies)
A lot of my fans does not work properly with PWM, how about a very slow PWM (e.g. 1s on 1s off for 50%) and some other fans that i have can go down to 12% speed but only if they already rotation, if...
View ArticleMissing eyes and mouth... (3 replies)
Hi, I am new to the 3D printing open software. using the Repetier, I printed a key chain stl file (refer Pic 1) but the printed key chain (refer Pic 2) didn't come out as per the stl file . As you can...
View ArticleSize and weight (2 replies)
Hi all, is there any way we can see the model size in mm or inch and also the weight after the model has been sliced?
View ArticleLayers not sticking (no replies)
I tried to print a hollow vase but some of the layers were not sticking to each ( photo attached). I sliced it with Skeinforge. Which setting should I change? Thanks...
View ArticleRepetier-host extruder and print bed temperature problem (1 reply)
Good day All I am having a problem with the temperature that Repetier host ver 0.85b reports from the print head and the print bed. Both are reported at a starting temp of 200 C. with or without the...
View Articlequelle version choisir ? (1 reply)
Bonjour pouvez-vous m'éclairer sur quelle version de firmware Repetier prendre pour une Prusa avec gen7 1.3.1 la dernière version (0.85) compile avec des etteurs dans gcode.h. merci
View ArticleSome heaters (2 replies)
Is there any chance you could get the "some heaters are still on" warning message as settings checkbox or even configuration file option?
View Articlemegatronics v2.0 with lcd and keypad from reprapworld (1 reply)
Hi all, for my prusa i3 i want to setup a display and seperate keypad (both from reprapworld) for anonymous printing. I just can't get it to work. Does somebody has this working and is willing to...
View ArticleSpeed Multiply / Feedrate - inactive - Please Help (5 replies)
Hello I have used the Feedrate in Repetier before and now for unknown reason the button is inactive. The Flowrate button is working. Can somebody help me to reactivate it? I use RH 085 and the printer...
View ArticleCura + Repetier fw (3 replies)
From time to time I've stepped into models that won't slice in Slic3r, therefore I've to revert to Cura then reading the gcode back into Repetier Host. Out of curiosity, i've tried the Cura machine...
View ArticleRepetier-Host 0.90 beta windows Feedback wanted (38 replies)
Hello, I'm finished with all intended features of the next host version. Having made quite a lot of changes, I would like to get some feedback if everything works as expected. You can get the beta...
View Articlehost 0.90 (non-beta) doesn't see my Windows com ports (7 replies)
have found that the 0.90 (non beta) Windows version wont connect to my reprappro mendel, which uses the USB port via the virtual "com10" on my workstation. when I try to choose the port to connect to...
View ArticleRepetier Host 0.90 - function of "cut objects"? (1 reply)
What does the "cut objects" function on the object placement tab do? I was hoping that it would actually cut the model and allow partial printing, but it doesn't appear to. Is it just a visualization...
View ArticleRepetier bug with rotation. (3 replies)
If set the Rotation to -90, 0, 45 and try to slice it I get a "Generated G-Code Not Found" error. Works fine if I do not rotate. Can anyone else replicate the issue? It used to work, then not....
View ArticleDetermining Microstepping and steps/mm (1 reply)
So on my Azteeg X3 I have removed all the jumpers ( W want to try withot microstepping because my motors jerk and are "notchy " when they move . Where config.h says to define microstepping (8 , 16 ,...
View ArticleRepetier-Firmware with Delta Support (no replies)
Anyone have a quick guide on setting changes for this? I have a rostock prisma, tried to get ONE motor to move and nothing. I've never setup a delta before, so not 100% how to setup the endstops, and...
View ArticleM109 Hangs in Repetier-Host due to wild extruder temperature swings (14 replies)
In Repetier Host, I set Extruder Temp for 230c but it will swing between 220c and 250c As a result, when I run the gcode sliced by Slic3r the program will often hang because the temperature is too...
View ArticleI "wish" we could have a few Printer Settings back in V0.9.0B!! (no replies)
I understand that you do not want us to change settings while the print is in progress, but I really miss the ability to determine what happens at end of print with regards to whether (or not) to...
View ArticleRepetier Host 0.90b Loubie Lizard bug? (6 replies)
When I slice Loubie (http://www.thingiverse.com/thing:71198) through repetier host using slic3r (0.9.10b), he has no eyeballs. But when I slice him directly using slic3r, he has eyeballs. Anyone have...
View ArticleRepetier-Host / Speed multiply / R2C2_Teacup (6 replies)
Hey guys, Im using a R2C2 Board. I think it is a teacup firmware "clone". The speed slider is greyed out in Repetier Host. Is there any possibility to change the speed during the print process ? thx...
View Article