Problems with Endswitches (Azteeg x3) (no replies)

Hi there,

First my setup:

-Ordbot Hardon
-Azteeg X3
-Bulldog XL Extruder
-Merlin Hotend
-Repetier


I set up my new 3D printer and have problems with my Endswitches.The Z-Axis works complete but the X and Y not correctly.
The curious thing is that the MIN Endswitch of Y and X-Axis is working ( check them with the Comand (M119)) but when the switch hit the end position the stepper doesn't stop moving.The MAX Endswitch of Y and X doesnt work completely( check them with the Comand (M119)) Furthermore my Extruder spins in the wrong direction and i doesn't find the invertion property in the Repetier FW.I attached my Config.
I'm totally new in this 3d Printing world.


EDIT: The MAX Y and X Endswitches works now i haven't set these two settings: :o

#define MAX_HARDWARE_ENDSTOP_X true
#define MAX_HARDWARE_ENDSTOP_Y true

I still need help with the extruder and the non stopping steppers when the endswitches set high ! need this for homing :S

Best regards
Chris0z